IMPLAN Pro: Creating Aggregated Regions - Building MSA, Watershed, Multi-County, and Multi-State Models – IMPLAN - Support

This article is specifically designed to deal with questions about building aggregate regional models. Detailed instructions concerning the initial steps to beginning a new Model can be found here.

Creating a Twin Cities MSA Model

For this example, we are using a Minnesota State Package and are looking to aggregate a 7 county region to create a Twin Cities MSA model.

Scroll through the list of counties and highlight the data files that you need to add to the MSA region by holding down the CTRL key. Once all desired counties are highlighted, click the button.

You can see that 7 regions will be included in this Model. Click to build your Model.

The MSA Model is done and ready to use.

Creating a CA Watershed Model

In this case, we have a California State Plus Package and are looking to aggregate both County and Zip Code data files to build a Watershed.

Scroll through the list of counties and highlight the data files that you need to add to your model by holding down the CTRL key. Once all desired counties are highlighted, click

revised counties

Select to locate the appropriate Zip Code files you wish to use in your model. Scroll through the list of Zip Codes and highlight the data files that you need to add to your model by holding down the CTRL key. Once all desired Zip Codes are highlighted, click.

ca zip codes watershed

You can see that 6 regions will be included in this Model. Click to build your model.

The CA Watershed Model is complete and ready to use.

model overview for watershed

Creating a Multi-State Regional Model

To demonstrate building a Multi-State aggregated region, we will use the AZ, UT, CO & NM (4 Corners) State Total Files.

Scroll through the list to locate and highlight the State Total File, and then click

start of 4 corners

Select to locate the next appropriate State Totals File you wish to use in your model and click

all 4 corners

You can see that 4 regions will be included in this Model. Click to build your model.

The Multi-state Model is complete and ready to use.

completed 4 corners model

Creating a Multi-County Regional Model

To demonstrate building a Multi-County aggregated regional model, we will use the WI State Data Package.

WI county

Scroll through the list of County Files and highlight those that you need to add to your model by holding down the CTRL key. Once the desired files are highlighted, click .

wi counties

You can see that 4 regions will be included in this Model. Click to build your model.

The Multi-State Model is complete and ready to use.

revised model overview

Articles in this section

IMPLAN Pro: Creating Aggregated Regions - Building MSA, Watershed, Multi-County, and Multi-State Models

Creating a Twin Cities MSA Model

Creating a CA Watershed Model

Creating a Multi-State Regional Model

Creating a Multi-County Regional Model

Comments

Articles in this section

Creating a Twin Cities MSA Model

Creating a CA Watershed Model

Creating a Multi-State Regional Model

Creating a Multi-County Regional Model

Related articles